A Manifold set up for the Vac pump/Micron Gauge.

[Trehak01]

Anyone know where I can get the parts to build a manifold setup for my vacuum pump..

I use the Yellow Jacket Titan gauge with the 3/8" vac. port when i vacuum down systems now, and would like to continue to use that. My digital micron gauge is 1/4". good thing my vacuum pump has both ports already equip.

If you wanted to use your 3/8" hose from your manifold set for vacuuming and the micron gauge that has 1/4" male fittings and some kind of valve to close off to isolate the vac pump from the system with the micron gauge on the system side all from copper tubing's, how would you do that?

hope this isn't to confusing and not that difficult.

Thank you in advanced.

[hvaclover]

Not confusing for me...I know where to buy that stuff.

[Trehak01]

if you don't mind sharing, are they online stores? what parts would I need?

[hvaclover]

C'mon..do a Google search... why you think I'm the only one who responded to your post?

[pacnw]

OP's sig line.:whistle:

[JTCHVAC]

http://hvac-talk.com/vbb/showthread.php?t=1073681


Anyone know where I can get the parts to build a manifold setup for my vacuum pump..

I use the Yellow Jacket Titan gauge with the 3/8" vac. port when i vacuum down systems now, and would like to continue to use that. My digital micron gauge is 1/4". good thing my vacuum pump has both ports already equip.

If you wanted to use your 3/8" hose from your manifold set for vacuuming and the micron gauge that has 1/4" male fittings and some kind of valve to close off to isolate the vac pump from the system with the micron gauge on the system side all from copper tubing's, how would you do that?

hope this isn't to confusing and not that difficult.

Thank you in advanced.