I LIKE TO FIND OUT A WAY TO CHECK COMPRESSOR OIL LEVEL,I CUT OUT A COMPRESSOR BOTH COPPER LINE,AND DISCHARGE LINE (WHICH IS ABOUT ONE INCH HIGHER TO BOTTOM OF COMPRESSOR)I CUT CLOSE TO THE COMPRESSOR ,AND I DONT SEE ANY OIL COME OUT FROM DISCHARGE LINE,IS OIL LOW?IS THERE ANY CHART I CAN GO BY?OR I HAVE TO CALL THE MANUFACTURED?THANKS
Birmingham
04-19-2012, 11:50 PM
the oil level should be very close to the suction line height of the compressor. turn it over on its side a little you should see oil, if not its low. we change a lot of compressors i have had a ton of oil spill in my van.
suction line height?mean oil is about 3/4 full in compressor?
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.