PDA

View Full Version : Rheem 2 speed a/c



Kevin Weaver
04-17-2012, 12:25 PM
We installed a Rheem RAPL060JEC a/c, new furnace, humidifier, IAQ stat...

Long day for my lead installer and a helper. I am in sales but helped all day, a little.

Got to the point where we plug in the dis-connect. Sparks flew from pull out and the a/c's circuit board had a nuclear melt down to say the least. Was wired correctly..

Ever had this before???

jpb2
04-17-2012, 01:36 PM
RARL maybe ? My bet is that it WASNT wired correctly. That is a communicating model that can be wired to a conventional control if care is taken. To the original question no I have not seen it.

Sicofthis
04-17-2012, 01:41 PM
Sounds like a direct short between both legs. Hard to say without seeing it.

SBKold
04-17-2012, 05:13 PM
You gotta keep the smoke trapped inside the board!

mark beiser
04-17-2012, 08:46 PM
:worthless: