Metasys Configurable Output

[dragkon]

Hello people,
I have a Metasys devices like FEC and i need to configure the universal input and configuration output in binary mode but i can't do it. I rode and rode the manual but don't understand what i need to do.

I'd like your help to resolve this problem

thanks

[berg2666]

Define Hardware

[dragkon]

well, i have a FEC2611 and the main controller is NAE. i'm using Metasys through Internet Explorer to manage the devices.

[Hensman]

You have to have CCT

[dragkon]

but is mandatory to have CCT???......how do you configure "configurable output" to "Binary output" in CCT

[Hensman]

Create the input, then, as berg suggested, go to define hardware and assign to input.

And yes it is mandatory.

[dragkon]

Hensman, could you explain me how to use a Configurable output as a binary output,.what parammeter do i need to change??

[berg2666]

In CCT under define hardware you add the new point, at this point you tell it is what it is, then you assign it to the physical point through define hardware. All done in CCT....

Are you on a customers computer, if so click on tools at the top and field tools cct. If it installed then it will run, if not you will get the error about the tool not being there...

[dragkon]

I got the follow error: "You must first install the passtrhu components on this machine before running the selected tool"......what it exactly means....? how can i get the CCT tool.......my supply saidme that just with the Internet Explorer and java plataform i could configure my devices......

thenks for your help body

[berg2666]

I got the follow error: "You must first install the passtrhu components on this machine before running the selected tool"......what it exactly means....? how can i get the CCT tool.......my supply saidme that just with the Internet Explorer and java plataform i could configure my devices......

thenks for your help body


With that error it means you do not have SCT or CCT installed. I am not sure who your supply is but they lied. You use internet explorer to make changes in the NAE but not the field devices. To get SCT and CCT you should contact your JCI and tell then you want to purchase the MS-SCTSWO-0.

[Hensman]

Well said berg

[DDCsean]

CCT is the software tool that allows you to access the programming and parameters within the FEC. So you must have CCT to upload the FEC, make the changes, then download those new changes to the FEC. This is the tool that allows you to access "define hardware."

SCT is the tool that will allow you to upload and download your NAE. This also includes "passthrough components." So to upload/download an FEC through the NAE, you need SCT and CCT. If you just want to upload/download the FEC directly, than you need CCT and a bluetooth CVT.

[dragkon]

ok, now it's clear, so i need to contact my supply.......
thanks a lot for your help

[DDCsean]

I can help you get some of those tools as well. I have direct access to different distributors so if you want, send me an email (in my profile) and I can get a quote together for you. Good luck!

[dragkon]

thanks for the information DDCsean

[cal-cu]

i can't do it. I rode and rode the manual but don't understand what i need to do.

I'd like your help to resolve this problem



Я ехал и инструкции по управлению, но я знаю, что делать

[dragkon]

I can help you get some of those tools as well. I have direct access to different distributors so if you want, send me an email (in my profile) and I can get a quote together for you. Good luck!

Hi DDCsean, could you give the CCT system price?,

[DDCsean]

Prices can't be posted in here. You have to send me an email and then I can help.